Online specials

CDF Corporation manufactures liners, lids and other value-added products used with industrial containers, such as drums, pails and intermediate bulk containers. Below is a list of our Online Specials.

Call for special pricing on the following products:

ProductS for Pails

5as/11/cc A seamless, straight-sided insert designed to fit a 5-gallon steel pail. This insert is vacuum-formed from FDA approved low-density polyethylene. The 5AS/11/CC has a contoured lip that snaps over the pail’s top bead, preventing leakage between the insert and pail wall. The anti-stat reduces static electricity build-up. This liner is compliant with the MIL-B-81705-C specification.

f5/15-05-09 The form-fit, round-bottom shape of the F5/15-05-09 minimizes wrinkles and folds, thus reducing stress that often tears flat-seam designs and allows complete recovery of valuable product from 5-gallon pails. The walls are made with a lamination of polypropylene, foil and polyethylene.

f5/16-08-01 The form-fit, round-bottom shape of the F5/16-08-01 minimizes wrinkles and folds, thus reducing stress that often tears flat-seam designs and allows complete recovery of valuable product from 5-gallon pails. Its flexible, heat-sealed construction is uniformly liquid tight.

f5/24-04-34 The form-fit, round-bottom shape of the F5/24-04-34 minimizes wrinkles and folds, thus reducing stress that often tears flat-seam designs and allows complete recovery of valuable product from 5-gallon pails. Standard 4-mil thickness provides a contoured fit and offers the best value. Its flexible, heat-sealed construction is uniformly liquid tight. Made from polypropylene for temperatures up to 290.

f5/32-04-34  The form-fit, round-bottom shape of the F5/32-04-34 minimizes wrinkles and folds, thus reducing stress that often tears flat-seam designs and allows complete recovery of valuable product from 5-gallon pails. Standard 4-mil thickness provides a contoured fit and offers the best value. Its flexible, heat-sealed construction is uniformly liquid tight. Made from polypropylene for temperatures up to 290.

pts-5gal A seamless, straight-sided strainer designed to fit with 5, 10 and 15 gallon pressure tanks. This insert is vacuum formed from FDA approved high-density polyethylene. The PTS-5GAL has a contoured lip that snaps over the tank top bead. The bottom is sealed with a coarse 600 micron mesh. The anti-stat reduces static electricity build-up. This strainer is compliant with the NFPA-99 specification.

PRODUCTS FOR DRUMS

f30/32-05-09/05-07 The form-fit, round-bottom shape of the F30/32-05-09/05-07 minimizes wrinkles and folds, thus reducing stress that often tears flat-seam designs and allows complete recovery of valuable product from 30-gallon drums. The walls are made with a lamination of polypropylene, foil and polyethylene; the bottom is made with a polyethylene, foil and polyester lamination.

f55/24-05-25 The form-fit, round bottom shape of the F55/24-05-25 minimizes wrinkles and folds, thus reducing stress that often tears flat-seam designs and allows complete recovery of valuable products from 55-gallon drums. 24 inches tall, made of nylon.

f55/38/56-08-01 The form-fit, round bottom shape of the F55/38/56-08-01 minimizes wrinkles and folds, thus reducing stress that often tears flat-seam designs and allows complete recovery of valuable products from 55-gallon drums. Double-thick, 8-mil film provides a strong, contoured fit and delivers excellent value. Its flexible, heat-sealed construction is uniformly liquid tight.

f55/56-03-01/dl The form-fit, round bottom shape of the F55/56-03-01/DL minimizes wrinkles and folds, thus reducing stress that often tears flat-seam designs and allows complete recovery of valuable products from 55-gallon drums. The liner is made from linear low-density polyethylene. Its flexible, heat-sealed construction is uniformly liquid tight. For steel drums only. For use with powders or high viscosity materials.

f55/40-04-01 The form-fit, round-bottom shape of the F55/40-04-01 minimizes wrinkles and folds, thus reducing stress that often tears flat-seam designs and allows complete recovery of valuable product from 55-gallon drums. Standard 4-mil thickness provides a contoured fit and offers the best value. Its flexible, heat-sealed construction is uniformly liquid tight. For use with powders or high viscosity materials.

PRODUCTS FOR DRUMS AND PAILS

dc30c(#) Made from FDA approved low-density polyethylene film, the DC30C(#) dust caps have a nylon elasticized band that is securely sewn for easy slip on/ slip off inspection of the contents of open-head 30-gallon drums.

dc36(#) Made from FDA approved low-density polyethylene film, the DC36(#) dust caps have a nylon elasticized band that is securely sewn for easy slip on/ slip off inspection of the contents of drums with a diameter of 30 inches.

dc44x28/4mil(#) 38 inches x 22 inches rectangular dust cap made from FDA approved low-density polyethylene film.

dc48(#) Made from FDA approved low-density polyethylene film, the DC48(#) dust caps have a nylon elasticized band that is securely sewn for easy slip on/ slip off inspection of the contents of drums with a diamter of 42 inches.

dc50(#) Made from FDA approved low-density polyethylene film, the DC50(#) dust caps have a nylon elasticized band that is securely sewn for easy slip on/ slip off inspection of the contents of drums with a diamter of 44 inches.

drco55/white(#) Made from thick, woven, polyethylene, the DRCO55/WHITE(#) drum cover has a nylon elasticized band that is securely sewn to fit snugly over the lid of an open-head 55-gallon drum. The white material stays flexible in cold environments.