pillow-shape IBC LINERS

High-performance industrial tote liners for bottom filling Intermediate Bulk Containers

When filled, these industrial tote liners form the shape of a pillow. Pillow-shaped liners are typically constructed with two or three plies of linear low-density polyethylene (LLDPE) and a barrier film when used for aseptic and oxygen-barrier applications.

BENEFITS

• Manufactured in a clean environment, using cutting-edge CDF1 Smart Seal Technology™ that monitors and ensures consistent, high quality seals.

• Pillow-shaped liners ensure the absolute purity of your product.

• Pillow-shaped industrial tote liners reduce foaming in bottom-filling applications.

• Pillow-shaped liners provide versatility; the same size bag fits many container sizes.

• Pillow-shaped industrial tote liners are an excellent value for a wide range of applications: bottom-fill aseptic applications, automated aseptic fillers.

• CDF offers a variety of films, fitments and fitment placements.

CDF1 SMART SEAL TECHNOLOGY™

Using state-of-the-art equipment and quality control standards of the highest caliber, CDF1 Smart Seal Technology ensures the ultimate reliability of IBC pillow liners.

Proprietary CDF1 Smart Seal Technology optimizes precision and consistency through monitoring the temperature, time and pressure of every seal on every liner.

MULTIPLE SIZES

Pillow-shaped industrial tote liners are available in the following sizes. Other sizes are available by request.

36” x 61”             55 gallons aseptic

38” x 56”             55 gallons

81" x 81"             275 gallons, recommended for standard wood bins used in the

                             aseptic tomato and juice industries

81" x 85"             275 gallons/ 300 gallons aseptic, recommended for a standard

                             wood bin tote or plastic IBC tote

85” x 89”             330 gallons

90” x 90”             330 gallons

81” x 92”             350 gallons

95” x 95”             over 350 gallons

MULTIPLE FITMENT CHOICES

CDF fitments are available in a variety of sizes.

MULTIPLE FILM CHOICES

All liners are made in America, the inside layer is made from FDA-approved films.

Barria™ metallized polyester is for oxygen and water vapor barrier.

Flexus™ and Flexus HF metallocene LLDPE are for general use, durability and flex crack resistance.

Tenalon™ co-extruded nylon film is for abrasion resistance, durability and strength.

The film materials used in the manufacture of our IBC liners comply with FDA Regulations 21 CFR 177.1520, CFR 175.105, 177.1390 and CFR 177.1630.

We guarantee that our liners will be constructed from the specified materials and that CDF will not knowingly use materials that are out of specification or could be adulterated.

No additives are introduced during the heat-sealing process.

CUSTOM DESIGNS

CDF will always consider custom designs.